This course is project oriented, you will be competent in modeling and detailing steel structures upon completion. Lear step-by-step on an actual project from modeling, detailing to documentation.
Learn from any location worldwide on your computer, tablet, or phone.
🔻Check the table of contents (content) and details for this course below🔻
Content Benefits Details
- 1.1-Levels and Grids
- 2.1- Main Columns and Rafters
- 2.2-Side and inner columns
- 2.3-Floor Beams
- 2.4-Infill Beams using Beam Systems
- 2.5- Curved Beams
- 2.7-Slanting or sloped Beams
- 2.8-Slanting beams using ofsets
- 3.1-Composite Metal Deck Floor
- 3.2-Floor Openings
- 3.3-Eaves Beams
- 4.4-Purlins by refference planes
- 4.2-Purlins by beam systems
- 4.3-Side rails modeling
- 5.1-Vertical bracings
- 5.2-Roof Bracings-Best Method
- 6.1-Concrete Columns
- 6.2-Pad Foundations
- 7.1-Spliting Members -Before Connection Creation-1
- 7.2-Visibility And Graphics Overides Part 1-1
- 7.3-Visibility And Graphics Overides Part 2 (With Object Styles)-1
- 7.4-Filters-1
- 8.1-Uploading Connections
- 8.2-Haunch Connection
- 8.3-Apex connection
- 8.4-Base plate Connection
- 8.5-Single Purlin Connection
- 8.6-Double purlin splice angle connection part 1
- 8.7-Double purlin splice angle connection part 2
- 8.8-Double purlin splice plate connection for side rails
- 8.9-Gusset plate at 4 diagonals
- 8.1.0-Gusset plate at two diagonals
- 8.1.1-Gusset plate at one diagonal
- 8.1.2-Gusset plate at column and base plate
- 8.1.3-Copy Bracings With Connections To Similar Locations-1
- 8.1.4-Moment Connection Using End Plate-1
- 8.1.5-Double Sided End Plate Connection-1
- 8.1.6-Single Sided End Plate Connection-1
- 8.1.7-Clip Angle connection
- 8.1.8-Splice joint connection
- 8.1.9-Steel Plates - fabrication elements
- 8.2.0-Openings using contour cuts on steel elements
- 8.2.1- Corner cuts on plates and mitres on beams
- 8.2.3-Shear studs
- 8.2.4-Coping on beams
- 8.2.5-Beam or column shortening
- 8.2.6-Custom connection Part 1
- 8.2.7-Custom connection Part 2
- 8.2.8-Custom Connection Part 3Of3-1
- 8.2.9-Base Plate connection using Dynamo
- 8.3.0-Clip Angle connection using dynamo
- 8.3.1-Dynamo clip angle connection beam to column
- 9.1-overview
- 9.2-Start and End Releases
- 9.3-Support conditions-Boundary Conditions
- 9.4-Creating load cases
- 9.5-Placing area loads
- 9.6-Linear loads-Lateral loads
- 9.7-Load combinations According to Eurocode
- 9.8-Analytical model adjustment
- 9.9-Export Revit model to Robot structural analysis for calculation of results
- 9.1.0-Update revit model with ranalysis esults from Robot
- 9.1.1-Explore results-reactions
- 9.1.2-Explore results-Moments
- 9.1.3-Explore results- Shear forces and dsplacements
- 10.1-Reinforcement cover-Pad foundations
- 10.2-Pad foundation reinforcement part 1
- 10.3-Pad foundation reinforcement part 2of2
- 10.4-Copy Reinforcement-1
- 11.1-Detailing Ground Floor Layout Plan-1
- 11.2-Detailing -First Floor Plan (Tos)-1
- 11.3-Detailing -Roof Framing Layout Plan
- 11.4-Framing Elevation 1
- 11.5-Framing Elevation 3
- 11.6-Foundation Layout
- 11.7- Custom Bolt Tag
- 11.8-Custom Plate Tag
- 11.9-Connection Details-Apex Haunch
- 11.1.0-Connection Details- Knee Of Frame
- 11.1.1-Moment End Plate Connection Details-Plan And Section
- 11.1.2-Fly Brace Connection Detail-Plan And Section
- 11.1.3-Reinforcement Detailing In Plan And Section-Pad Foundation
- 12.1-Loading Editing And Customising Sheets
- 12.2-Placing Plans And Elevation Views On Sheets
- 12.3-Placing Detail Views On Sheets
- 12.4-Placing Bbs, Framing And Column Schedules On Sheets
- 13.1-Print Drawings To Pdf
Douglas Sinkololwe is a Civil/structural Engineer who is passioante about Building Information Modeling (BIM) software and the application of software tools in the Architecture Engineering and Construction (AEC) Industry to improve design efficency. He has been using Revit software for over 5years now on structural and reinforced concrete building projects. He is the tutor and founder of skillmax Academy
Skillmax Academy prides itself in providing professional instructional video lessons accompanied with materials for the Architecture Engineering and construction (AEC) Industry. We train Architects Engineers and designers and students in the fileds to master the software tools to improve efficiency in their design workflows.
All our tutors are professionals in the AEC Industry and therefore their method of teaching is tailored to how it is done on the real projects. All our courses come with a completion certificate available for download upon completion
Evaluations
Frequently Asked Questions
Every rating shown on this page was made by real people who purchased the product and gave their opinion about the course. When a person buys a course through Hotmart, they are invited to rate the content. The rating shown on this page is the average of these ratings by the buyers, and is from 1 to 5 stars.
The average rating of Autodesk Revit Structure-Modeling and detailing of steel structures is 4 stars. After every purchase made through Hotmart, you have the opportunity to rate the quality of the course and your level of satisfaction. With the buyers’ opinions, our system calculates the average rating and we collect comments that will help other people at the moment they are deciding to buy the product.
The Guarantee Period is the time you have to request the total refund of what you paid for your purchase if you are not satisfied. As soon as it is requested, your refund is processed automatically by the platform in up to 5 days. For payments via bank payment slip, it is necessary to provide bank account information for the refund to be made. After the information has been provided and the processing period of 5 days, the amount will be credited to your account in up to 7 business days. As for refunds on your credit card statement, it varies according to the payment method and may appear in this month's or next month's statement.
Some online courses offer a digital certificate of completion. Students can issue this certificate at the end of the courseor by contacting the Author. These certificates can be shared on social networks like LinkedIn and included in your CV.
Hotmart products have benefits that change according to the type of product and availability. For example, products in the category "Online courses" may or may not offer a digital certificate of completion. If the certificate is available, students can issue it within the course Members Area or by contacting the Author. Certificates can be shared on social networks like LinkedIn and included in the student's CV. The guarantee is also a benefit of our products and can vary from 7, 15, or 30 days, according to what is set by the Author. To see the benefits available for this product, just check the Advantages section.
You'll receive access to Autodesk Revit Structure-Modeling and detailing of steel structures by email. It may be an online course, an eBook, a series of video lessons, a service, an event, etc. This content will be accessed or downloaded through a computer, mobile phone, tablet, or any other digital device. You can also access the product you purchased on this page:
To order this course, click “Buy” on the top of this page. Keep in mind that not all courses will always be available to be purchased. A creator may be preparing a new lesson and registration for the course may be temporarily unavailable.
If you wish to become an Affiliate, we recommend that you read the guides that we provide on all Hotmart channels. A great way to get more information is by visiting our blog. The product on this page is only available for purchase, to view affiliation products, go to the Affiliate Market.
We have an exclusive channel to receive reports on products that do not comply with the guidelines of the Hotmart platform.
Access our Help Center where we explain, in detail, every question you may have before, during, or after purchasing a digital product through Hotmart.